Gas Engine Component Technology
- Gas Injectors
- Coalescing Filter Assemblies
- Shut-Off Valves
- Pressure Regulators
- TAB (Turbo Air Bypass) Valve Assemblies
Clean Air Power natural gas injectors are widely used in the natural gas industry for multi and single point gas injection and are certified to the European standard ECE R 110. All natural gas injector body and internal parts are constructed from stainless steel with maximum operating pressure differential ranges from 125 to 300 psi. Drop-in mounting is offered with flying pigtail leads or quick connection options, while coils are available for 12-24v DC. Every unit is 100% tested for flow delivery, pressure leaks and performance.
SP-Series Gaseous Fuel Injectors - 2 page.pdf
Clean Air Powerscoalescing filters are well known throughout the industry with an aerosol removal efficiency greater than 99.9% in the 0.3 - 0.6 micron particles range. All coalescing filters are certified to the European standard ECE R 110 and are made of high tensile strength aluminum for pressurized gas use to 3,600 psig with a safety factor of 4:1. Clean Air Power coalescing filters are designed to meet the needs of medium and heavy-duty gas-fuelled engines. High flow ratings and large holding capacities for undesired impurities provide the added performance necessary for the most demanding applications.
High-Pressure Coalescing Filter 616190-1
Low-Pressure Coalescing Filter 620360-1
Clean Air Power natural gas shut-off valves are constructed of high quality corrosion-resistant materials and have high performance valve seats. Engineered for use in natural gas engines, the valves have a rated working pressure of 125 psi and are machined with "16 UNF-2B thread (-8 SAE straight thread O-ring port). Natural gas shut off valves have 12v DC coils with Packard PED 1201 0973 connectors and a current draw of 1.6 amp when fully energised. Each unit is 100% functionally tested for pressure leaks and performance.
Shut Off Valve & Block Specification 619260-1
Gas pressure regulators are designed primarily for second stage regulation of a variety of gases. LNG and CNG gaseous pressure regulators are available in either "16 UNF-2B thread (-8 SAE straight thread O-ring ports) or in " NPT threads. The maximum inlet pressure is 400 psi and the delivery pressure ranges from 100 to 200 psi. Two inch gauge ports are located 180 apart to allow for gauge mounting in the most convenient positions. The large nozzle and diaphragm areas provide high capacity with sensitive control of delivery pressure, whilst having the ability to perform under rigorous conditions.
LNG Pressure Regulator Model 905416-1
TAB (Turbo Air Bypass) Valve Assemblies
Clean Air Power's unique Turbo Air Bypass (TAB) valve assemblies are used to bypass excess turbo compressor air. TAB valves utilise high performance actuators with a 2" butterfly valve and operate at 12-24v DC. TAB valve assemblies are easy to install and provide consistent performance.